
A new milestone for AS Automation Services and AS Automation Systems Training Centre PLT: our 5-day Basic to Advance PLC training is verified under UTM QV SAMC, MQA Level 4, effective 23 November 2026.
QV SAMC stands for Quality Verification for Stand-Alone Micro-Credentials. The supplied verification mark identifies Universiti Teknologi Malaysia (UTM). This recognition applies specifically to our eligible five-day Basic to Advance training, according to the PLC course chosen—not to every training duration.
To receive this recognition, participants must complete the full 5-day programme and its 40 credit hours. Select the PLC brand, model and software that match your learning needs, then follow that course’s published structure from Basic to Advance.
Our 3-day training is not accredited under MQA. It remains an option for focused skills development, but learners seeking UTM QV SAMC / MQA Level 4 recognition should choose an eligible five-day course and complete all 40 credit hours. Two-day weekend courses are also outside this recognition scope. Custom or combined programmes are not automatically included.
Explore the training catalogue to compare the PLC courses and their outlines. The RFQ form highlights recognition when you select five days and explains the difference when you select three days. Submit your training enquiry through our Request Training Quotation form below.
An enquiry does not reserve a training slot. First book AND confirm, first served: your place is reserved only after ASASMY manually confirms the booking following an accepted PO or HRDCorp grant approval.
Explore eligible 5-day PLC course structures
Each course below is Basic to Advance, with completion of 40 credit hours required for UTM QV SAMC / MQA Level 4 recognition from 23 November 2026.
- Siemens S7-1200/S7-1500 PLC and KTP400 HMI using TIA Portal V18 / Basic to Advance / 5 Days.
- Siemens S7-300/400 PLC , Simatic Basic Panel HMI Using Simatic Manager V5.7 and WinCC Flexible Software / Basic to Advance / 5 Days.
- Siemens S7-1200/S7-1500 PLC , WinCC Comfort using TIA Portal V18 with IIOT & Cloud Programming / Basic to Advance / 5 Days.
- Allen Bradley Basic to Advance Training with RSLogix 5000 Software & ControlLogix PLC , 5 Days
- Allen Bradley RSLogix 500 & HMI (Basic, Intermediate & Advance) (5 Days) PLC Programming Training Course
- Mitsubishi FX-Series PLC GX Works 3 Basic to Advance + HMI and SCADA Training / 5 Days.
- Mitsubishi FX-3S PLC with GX Works 2, Basic to Advance + HMI & SCADA Training, 5 Days
- Omron Training, C Series Advance with CX-Programmer Software & PLC, 5 Days
- Omron Training, NX Series PLC Advance with Sysmac Studio Software & PLC, 5 Days
- Keyence KV Studio and VT Studio, Basic to Advance, 5 Days, PLC Programming Training Course
- Schneider SoMachine/Machine Expert , TM221 PLC & Vijeo Designer , HMI –Basic to Advance 5 Days
- GE Fanuc Advance Training with Proficy Machine Edition 9.5 Software & Series 90-30 PLC, 5 Days
Interested in Hands-On PLC Training?
HRDCorp claimable courses on real industrial equipment — at our Johor Bahru lab or onsite at your factory anywhere in Malaysia.
Request Training Quotation