AS Automation Services logo
Back to Blog

Which PLC Brand Should You Learn First?

8 November 2026 · AS Automation Services

Which PLC Brand Should You Learn First?

Estimated read time: 8 minutes

You have eight PLC brands on a shortlist and one training week to spend. Pick the wrong one and the certificate looks fine on paper, but the software on your laptop does not match the panel in your plant. This guide walks through how to choose your first PLC brand for work in Peninsular Malaysia, Sabah, Sarawak and Singapore, using the controller family sitting in front of you rather than a popularity ranking.

Why the First Brand Matters More Than the Second

Ladder logic, function blocks and structured text travel well between brands. The software, the cable, the fault codes and the online-monitor layout do not. Your first brand is the one you should be able to open, go online with, and read a program on without guessing. Everything after that is a second language, and it is much easier once the first one is fluent.

That is why a brand list on its own is a weak guide. The useful question is narrower: which controller family will you actually be asked to support in the next twelve months, and which software does that family use?

Start With the Panel, Not the Ranking

Before you book anything, open the electrical panel and photograph the CPU. The model number on the front of the processor tells you more than any "top brands" article.

  • Siemens S7-1200 or S7-1500 points to TIA Portal. At our Johor Bahru lab the current course uses TIA Portal V18, with WinCC Comfort for the HMI bundled into the same course.
  • Siemens S7-300 or S7-400 points to Simatic Manager, not TIA Portal. Plenty of plants still run these, and the software is a different product with its own habits. WinCC Flexible is the HMI side on that course.
  • Mitsubishi FX5U or FX5S points to GX Works3. Older FX3 lines use GX Works2, which is a different package.
  • Omron CP1E or CP1L points to CX-Programmer. An Omron NX Series CPU points to Sysmac Studio instead. Same badge on the door, two software worlds.
  • Allen-Bradley MicroLogix points to RSLogix 500. CompactLogix and ControlLogix point to RSLogix 5000. The two are not interchangeable.
  • Keyence KV-16DR and the wider KV range point to KV Studio, with VT Studio for the HMI bundled into the course.
  • Schneider TM221 points to Machine Expert, with Vijeo Designer for the HMI.

If the plant has two families, learn the one you get called out for most often. A second brand is a sensible follow-up course, not a reason to split your first week in half.

How Each Brand Shows Up in Local Plants

None of these is "the best". Each one is common in a particular kind of work, and that is the only ranking that should matter to you.

Siemens, When the Plant Runs a Process Line

S7-1200 and S7-1500 with TIA Portal show up widely in process and manufacturing plants across Peninsular Malaysia, Sabah, Sarawak and Singapore. S7-300 with Simatic Manager is the installed base you inherit rather than the one you specify, which is exactly why it still deserves a course of its own. If your maintenance log is full of Siemens fault codes, this is your first brand.

Mitsubishi, When the Machines Are Japanese OEM

FX5U on GX Works3 is a frequent find in electronics, F&B and machine-building lines supplied by Japanese OEMs. If the panels you open are mostly Mitsubishi, starting anywhere else means you are practising on hardware you will not see on Monday morning.

Omron, and the Trap of Two Software Packages

CX-Programmer for the CP1E and CP1L family, Sysmac Studio for the NX Series. Engineers who assume one Omron course covers both usually discover the gap on site. Check the CPU before you choose, and treat them as two courses if your plant has both.

Allen-Bradley, Split by Controller Generation

RSLogix 500 serves MicroLogix. RSLogix 5000 serves CompactLogix and ControlLogix. Oil and gas, ports and larger manufacturing sites in the region carry a lot of Allen-Bradley, but the software split is the same lesson as Omron: read the model number first.

Keyence and Schneider, When the OEM Chose Them

Keyence KV with KV Studio and Schneider TM221 with Machine Expert are less talked about and very real on the machines that ship with them. If that is your panel, a Siemens course will not help you download the program. Learn the brand that is actually bolted in.

A Simple Way to Decide This Week

  1. List the CPUs you have touched in the last three months, from memory or from the maintenance log.
  2. Group them by software, not by brand name. S7-300 and S7-1200 land in different groups.
  3. Pick the group with the most call-outs. That is your first course.
  4. If you are a fresh graduate with no plant yet, ask the employer or the recruiter which family their panels use, and default to the family most common in your target industry rather than the one with the most online tutorials.
  5. Plan the second brand for later. Do not try to cover two software packages in one week.

One more filter: HMI and SCADA are useful, but only once you can already read the PLC program they sit on. Both are taught bundled with a PLC course, never as a standalone class, because an HMI screen with no PLC behind it teaches you very little.

What a Week of Training Actually Covers

AS Automation Services and AS Automation Systems Training Centre PLT, based in Johor Bahru since 2012, run both formats on the same hardware you will meet at work. The 3-day course is Basic to Intermediate and covers the PLC plus the bundled HMI. The 5-day course is Basic to Advanced and adds analog input and output, VFD, IIoT and webserver topics, and SCADA, all on the same brand.

The split is 80% Hands-On and 20% theory. Class size is capped at 10, so you are not watching someone else hold the laptop. Five or more participants can be arranged onsite; fewer than five train at the Johor Bahru lab. You get a manual, a laptop, a PLC hardware kit, a certificate and free lifetime support. The standard project is the Mixer Tank, so every brand course ends with the same working system rather than a folder of unfinished examples.

Malaysian companies can claim the training under HRDCorp SBL-Khas, for company-sponsored and personal enrolment alike, with a minimum of two participants. Singapore participants train at the same lab; the claim scheme itself is for Malaysian companies only.

Safety note. Everything described here is for training on a training kit in a classroom or lab. It is not an instruction to modify, download to, or fault-find on live plant equipment. Going online with a running controller, forcing I/O, or changing a program on a production line needs your site's permit to work, a risk assessment and supervision from the person responsible for that plant. Practise on the kit first.

Frequently Asked Questions

Which PLC brand should I learn first in Malaysia?

Learn the brand whose CPU is already in the panels you maintain. Check the model number, match it to the software, and book that course. Siemens, Mitsubishi, Omron, Allen-Bradley, Keyence and Schneider are all common across Peninsular Malaysia, Sabah, Sarawak and Singapore, so popularity is a weak tie-breaker.

Is Siemens TIA Portal enough for every Siemens PLC?

No. TIA Portal covers the S7-1200 and S7-1500 families, and our course uses TIA Portal V18. An S7-300 or S7-400 is programmed in Simatic Manager, which is a separate software package with its own project structure. If your plant has both, plan on two courses.

Can I learn HMI or SCADA before the PLC?

You should not. An HMI or SCADA screen only makes sense once you can read the PLC program behind it. At our centre both are taught bundled inside the PLC course, with WinCC, NB, Weintek, VT Studio or Vijeo Designer depending on the brand, and never as a standalone class.

What if my factory uses two PLC brands?

Train on the one that generates the most call-outs first, and keep the second brand for a later course. Splitting one week across two software packages usually means you finish confident in neither. The software habits are different even when the ladder logic looks familiar.

Ready to Book the Brand You Actually Use?

Bring the CPU model number from your panel and we will point you to the matching course. You can browse the full list on the Courses page, or read how a single brand course is structured in our Simatic Manager beginner's guide.

Interested in Hands-On PLC Training?

HRDCorp claimable courses on real industrial equipment — at our Johor Bahru lab or onsite at your factory anywhere in Malaysia.

Request Training Quotation