ASASMY Blog

Training highlights, hands-on session recaps and industrial automation stories from our Johor Bahru training centre and onsite programs across Malaysia.

655 articles since 2014

Training (337 posts)

Clear filter

6 January 2020

Safety (Emergency) Circuits Requirements for PLC & HMI Power Supply in Malaysia

The source for a PLC power supply is generally single-phase and 120 or 240 VAC. If the controller is installed in an enclosure, the two power leads (L1 hot and L2 common) normally enter the enclosure through the top part

2 January 2020 3

Omron C-Series PLC with CX-Programmer Software + HMI Training, 1 PAX

OMRON C Series + HMI with CX Programmer Software, Basic to Advance, 1 PAX for a Engineer who works in a company that produce Curry Mixes and Spice Powders and consider a leading company in Malaysia.

1 January 2020 3

Mitsubishi FX Series PLC + HMI + Servo Motor Training Basic to Advance

Mitsubishi FX Series PLC with setting up Servo Motor + HMI, Basic, Intermediate & Advance, Personal Coaching, from Singapore. 2019 December.

28 December 2019 2

Mitsubishi FX Series PLC + HMI + Stepper & Servo Motors Basic to Advance Training

Mitsubishi FX Series PLC with Servo/Stepper Motor + HMI, Basic, Intermediate & Advance, Personal Coaching, 3 Days from a industrial automation company, Penang, Malaysia.

24 December 2019 2

Allen Bradley RSLogix5000 with CompactLogix/ControlLogix PLC and CITEC HMI, Basic to Advance, Personal coaching, From Australia. Class was conducted at our HQ at Johor Bahru, Johor.

Direct message me for inquiry, Whatsapp : +60163329691, Pricing is negotiable through phone call, we are #HRDF Registered Training Provider & Appreciated by Universiti Technology Malaysia ( #UTM ). Specialize in Industri

12 December 2019

Industrial Applications with PLC in Malaysia

In the most basic terms, a programmable logic controller (PLC) is a computer with a microprocessor but has no keyboard, mouse or monitor. It is essentially built to withstand very harsh industrial environments. Like, Sha

8 December 2019 2

Siemens S7-1200, Personal Coaching, Basic to Advance,Johor

4 December 2019 2

Omron C-Series PLC Basic & Intermediate with CX-Programmer Software , 2 PAX , 8 Days Weekends ( Contract Base Training November Batch ) for company from Indonesia.

The participant has learnt the following task:

27 November 2019 2

Siemens S7-1200 PLC 3 Days Training from SARAWAK

The Participant from SARAWAK has learnt the following task:

14 November 2019 6

Allen Bradley RSLogix5000 with CompactLogix/ControlLogix PLC Hardware, Basic, 4 PAX for a Power Plant company (Jimah O&M / Edra Global Energy Berhad), produce electricity by using mainly coal and other resources. Port Dickson, Negeri Sembilan. Class was

Allen Bradley RSLogix5000 with CompactLogix/ControlLogix PLC Hardware, Basic, 4 PAX for a Power Plant company (Jimah O&M aka Edra Global Energy Berhad), produce electricity by using mainly coal and other resources. Port

30 October 2019 2

Mitsubishi FX Series PLC with Servo/Stepper Motor + HMI, Intermediate & Advance 1 PAX, 5 Days for company that manufacture and do assembly & test service for microelectronics & processors.

The Participants has learnt the following task :

20 October 2019 2

SIEMENS S7-1200 PLC, TIA Portal V14, MicroWIN S7-200 Basic & Intermediate, 5 Days. International Participant from a Company call CLEAN ENERGY, Mongolia.

This is special requested course under Participant who came all the way from Mongolia. Who have finish the course and received a Certificate (For TIA Portal Basic & Intermediate with MicroWIN S7-200).

16 October 2019 5

Allen Bradley RSLogix5000 with CompactLogix/ControlLogix PLC Hardware, Basic, 15 PAX for a company that Manufacture Electronics, electronic components, PCBs, PCB components, computer chips, ink cartridge. Kulai, Johor. Class was conducted on site at thei

The Participant has learnt the following task : RS-Logix5000 V20.04 Software.

6 October 2019 8

SIEMENS S7-1200 (TIA Portal V15) with WinCC Flexible, iIot (Industrial Internet of Thing) Cloud & Webserver. Basic & Intermediate/ 6PAX, 3 Days.

The Participant has learnt the following task:

28 September 2019 2

Mitsubishi FX Series PLC with Servo/Stepper Motor + HMI, Intermediate & Advance 1 PAX, 5 Days for company that manufacture Elastic Netting, Tree Net, Covered Rubber Thread & Elastic Loops.

The Participents has learnt the following task :

11 September 2019 2

Siemens S7-1200/S7-300 + HMI with TIA Portal & SIMATIC Manager Software, Advance, 8 Days, 1 PAX, Participant from Turkey ( Under Personal Sponsor Special Request)

This is special requested course under Participant who came all the way from Turkey. Who have finish the course and received 2 Certificate (For Simatic Manager Advance & TIA Portal Advance).

30 August 2019 5

Mitsubishi FX-Series + HMI with GX Works 2 Software, Basic, 2 Days, 7 PAX (Under 3rd Party Training Provider)

(This training was conducted under HRDF Registred 3rd party training provider)

23 August 2019 5

Mitsubishi FX Series + HMI with GX-Works 2 Software, Basic Level, 6 PAX for a company that produce vacuum cleaner, Hair dryer, air purifier and air Wrap

The Participant has learnt the following task :

19 August 2019 2

Siemens S7-1200/S7-300 + HMI with TIA Portal & SIMATIC Manager Software, Advance, 5 Days, 1 PAX ( Under Personal Sponsor Special Request)

This is special requested course under Personal Sponsor.

10 August 2019 4

OMRON C Series + HMI with CX Programmer Software, Basic & Intermediate, 2 PAX for a company that produce vacuum cleaner ,Hair dryer, air purifier and air Wrap

The Participant has learnt the following task :

1 August 2019 4

Mitsubishi FX Series PLC with Servo/Stepper Motor + HMI, Intermediate & Advance 3 PAX, 3 Days (Including NEW Mitsubishi GOT Software) for company that manufacture plumbing products and bathroom accessories. Example polymer taps, valved, showers, bidet, t

The Participents has learnt the following task :

31 July 2019 10

Allen Bradley RSLogix5000 + HMI with CompactLogix & Micro850 PLC Hardware, Basic & Intermediate, 2 PAX for a company that operate and handle Airport Baggage Conveyor Systems in KLIA. Class was conducted on site at their premises for 3 Days.

The Participant has learnt the following task :

16 July 2019 2

SIEMENS PLC BASIC & INTERMEDIATE, 4 Pax , 8 Days Weekends

The participant has learnt the following task: Simatic Manager V5.5 (S7-300 PLC), WinCC Flexible 2008 SP3, Configuration of Hardware & HMI, Backup & Restore, WinCC Runtime, Omron Basic (Add-On), Online Debugging & Troubl

15 July 2019 2

OMRON C SERIES PLC ADVANCE , One-To-One , 5 Days

The participant has learnt the following task: OMRON PLC CP1L, CP1E Series, & CJ Series, Ladder Logic Programming, HMI & SCADA (V-SFT & TELLUS), CX Programmer V9.6 Software, Online, Downloading and ,Troubleshooting Proce

← NewerPage 13 of 15Older →