ASASMY Blog

Training highlights, hands-on session recaps and industrial automation stories from our Johor Bahru training centre and onsite programs across Malaysia.

631 articles since 2014

Training (332 posts)

Clear filter

8 May 2019 2

OMRON C Series PLC Advance & BECKHOFF Introduction , 4 PAX , 8 DAYS Weekends ( Contract Base Training ) for Healthcare, Lighthing and Consumer Lifestyle Manufacturing company.

The participant has learnt the following task:

5 May 2019 2

SIEMENS S7-300 PLC Basic Simatic Manager 5.5 , 3 Days .

The participant has learnt the following task:

19 April 2019 8

Siemens S7-1200 PLC Training with TIA Portal Software Basic for a Company that manufacture Animal-Feed Supplement under 3rd Party Training Provider / 10 Pax , 3 Days

Upon completion of this course, the students has succesfully able to: Construct, test and run S7-1200 PLC programs using instructions.

19 April 2019 8

Allen Bradley Logix5000 (Hardware- Control/Compact Logix) Intermdediate for Electronic parts Manufacturing and Service company in Senai , Johor / 8 Pax & 3 Days.

Upon completion of this course, the students has succesfully able to: Construct, test and run PLC programs using instructions.

13 April 2019 2

SIEMENS S7-300 With Simatic Manager and WinCC Basic ( Long Course 8 Days and PLC Project Involvement ) One-to-One Training

The participent has learnt the following task : Simatic Manager V5.5 ( S7-300 PLC ) (Basic Level)

9 March 2019 6

Allen Bradley Logix5000 ( Hardware - Control/Compact Logix) Intermediate PLC Training, 8 Pax, 3 Days

Upon completion of this course, the students has succesfully able to: Construct, test and run PLC programs using instructions.

2 January 2019 10

Preventive Maintenance for PLC System. #asasmy

Basic Introduction , Checklist & Procedure for troubleshooting Programmer Logic Controllers

31 December 2018 2

SIEMENS PLC (S7-300) With Software Simatic Manager V5.5 and WinCC Flexible 2008 SP3 + HMI. Basic , Intermediate & Advance , 5 Days from Malaya Glass . 1 PAX. #asasmy

The Participent ( Koo Li Chiat ) has learnt the following task : Simatic Manager V5.5 ( S7-300 PLC).

30 December 2018 2

Mitsubishi FX Series PLC with GX-Works2 Software + HMI, Basic Training ( One-to-One ) / 2 Days . #asasmy

The Participent ( BUSTAMAM MOKHTAR ) has learnt the following task : GX-WORKS 2.

30 November 2018 12

Omron CP1E PLC Basic Training under TSY Consultancy For Panasonic Automative Systems Malaysia SDN.BHD , Prai , Penang / 2 Days / 10 PAX .

Participent has learnt the following task : Omron PLC C-Series Basic.

22 November 2018 3

#Mitsubishi #PLC #basic #intermediate & #advance . one-to-one training at #johor asasmy hq , 5 days for mr.ben from #selengor #Personal .

The #Participent ( Mr.Ben ) has learnt the following task : Launching #GXWorks2.

16 September 2018

#SIEMENS #PLC #BASIC , #INTERMEDIATE , #ADVANCE . 5 Days , One-One Training

The Participant has learnt the following task: #Simatic #Manager V5.5.

21 August 2018 5

#Omron #PLC - #Basic #C Series Using #CX-#Programmer , 5PAX , 2 Days #Training @ #FMM , #jOHOR , tRAIN BY mR.tHIVYAN nAIR.

29 June 2018 11

#SIEMENS #PLC & #HMI #S7300/400 with #SimaticManager #V5.5 #Software #Trainning #Basic & #Intermediate #OSK #OLYMPICCABLE #MELAKA 3 Days , 7 Pax .

Training @ OLYMPIC CABLE COMPANY SDN. BHD.

6 May 2018 5

#ASASMY #HQ #JohorBahru #Johor - #OMRON #BASIC #CPSeries #CP1L #PLC using #CXProgrammer V9.6 , #SysmacStudio V1.18 + #HMI & #SCADA ( #VSFT & #TELLUS ) #Basic & #Intermediate + #BECKHOFF #TwinCat2 #Introduction for our valued customer from #PT . #Philip

#ASASMY #HQ #JohorBahru #Johor - #OMRON #BASIC #CPSeries #CP1L #PLC using #CXProgrammer V9.6 , #SysmacStudio V1.18 + #HMI & #SCADA ( #VSFT & #TELLUS ) #Basic & #Intermediate + #BECKHOFF #TwinCat2 #Introduction for our va

11 April 2018

#Mitsubishi #GX Work 2 + #TouchPanel + #Servo for #Samsung #SDI #Energy #Malaysia SDN.BHD at #NSSDC #Mantin Negeri Sembilan . 4 Days / 6 Pax

1 April 2018

#Siemens S7-1200 TIA PORTAL V14 #Intermediate #Personal #Training (In-House) 3 Days from #Honda #Assembly #Melaka . #TIAPortal #S71200 (Certificate Provided under #ISA #International #Standard for #Automation) . for more info , can directly contact Mr.

#Siemens S7-1200 TIA PORTAL V14 #Intermediate #Personal #Training (In-House) 3 Days from #Honda #Assembly #Melaka . #TIAPortal #S71200 (Certificate Provided under #ISA #International #Standard for #Automation) . for more

28 March 2018 2

Allen Bradley RS Logix 5000 Intermediate #Training at #Synergy #Sterilisation #Rawang (M) Sdn. Bhd. #Selengor 3 Pax , 3 Days (Certificate Provided under #ISA #International #Standard for #Automation) . #AllenBradley #RSLogix5000 #Intermediate #PLC #HMI .

Allen Bradley RS Logix 5000 Intermediate #Training at #Synergy #Sterilisation #Rawang (M) Sdn. Bhd. #Selengor 3 Pax , 3 Days (Certificate Provided under #ISA #International #Standard for #Automation) . #AllenBradley #RSL

20 March 2018 3

#Mitsubishi #PLC #GX #Developer & #Advance with #Servo #Motor #Training at NSSDC Mantin (2nd Batch ) From Hino SDN.BHD

This training is for technician from HINO.CO Seremban provided by NSSDC Mantin .

8 February 2018 4

Training #AllenBradley #RS Logic 5000 #Basic ( 1st Batch ) 8th Feb & 9th Feb (2 Days )

TOPIC WE COVERED :

← NewerPage 14 of 14